Awesome picture! The scratches can be so small that they are not visible with the naked eye.
Not Helpful 0 Helpful 0. What not to ever use when planing the face of a small piece of lumber? It will also save you time and money as you prevent spoilage of wood materials in the intermediate and final stages of your task.
If it is dull, disassemble the planer and replace the blade with a fresh new one to avoid rough cuts on the wood. Ideally, after you plane your wood, you'll have a smooth, flat surface that sits flush with any adjacent pieces of wood.
If the bow was down, the piece will rock form side to side as you machine it, not leaving a flat face. How to Plane Wood Author Info. Tilt the planer very slightly forward to bring the planer blade into contact with the board surface. Optionally, set the depth stop. Can it be related to sandpaper grit?
It can be used for general smoothing and straightening of all projects. Learn more.
If you don't want to use the depth stop, set it to a very low level - one much lower than the thickness of your board - so that you'll never hit this lower limit.
Begin smoothing and flattening your wood by placing the plane at the edge of the surface. Avoid bending at the waist to push, to prevent strain on your lower back.
Often, the "depth" of the cut itself isn't displayed on the planer, but the actual thickness that the wood is being planed to. To learn how to use a mechanical surface planer, scroll down!
Pull up on the wood as it passes the rollers to avoid snipe. This is much the same as planing the sides of a plank. JS Julie Stubbs Jul 26, 2016. In other words, if the bottom of the wood isn't perfectly flat, the planer will maintain this imperfection on the top surface.
It's good policy to start by using a shallow angle, then increasing the depth of the cut if necessary. Follow the guidelines below to use a wood planer safely and correctly.